Zhejiang Yuanpai Machine Tool Accessory Plant-- the biggest private owned lathe chuck manufacturing

	K10 series two-jaw self-centring chucks K10 series Two-jaw Self-centring chuck is of separate clutches and comes with soft clutches, It is suitable for processing various special shaped workpieces, such as tube, rectangular section accessories and so on. Users may change the plate to a certain holding style according to needs, higher centring accuracy can be achieved after being rubbed on the machine, so as to satisfy the need for holding.		K11 series three-jaw self-centring chucks K11 series Three-jaw Self-centring chuck is subdivided into three types, K11, K11A, K11C, Type K11 provides two sets of clutches in different directions,which can be used respectively. Type K11A provides, ISO3442 standard clutches, and Type K11C provides traditional separate clutches. Soft clutches are to be provided on request, higher centring accuracy can be achieved after being rubbed on the machine, so as to satisfy the need for holding.

	K12series four-jaw self-centring chucks K12 series Four-jaw Self-centring chuck is suitable for batch process of square, eight-square prism accessories and is self centring. Type K12 provides two sets of clutches in different directions, which can be used respectively, Type K12A provides ISO3442 standard clutches, and Type K12C provides traditional separate clutches.		K72 series four-jaw independent chucks K72 series Four-jaw independent chuck adopts short cylinder and short circular cone shape, Short circular cone shape can be subdivided into two types according to the way of joining with the rod of machine tool: Type A(joined with screw), Type C(bolt locking joint), Type D(pull rod, cam locking joint).

Home | About Us | News | Type Guide | Products | Feedback | Contact Us